The MOTM-830 is a dual mode (audio and/or control voltage) mixer. Using a clever switching scheme, the mixer can configure itself into either 6:1 or dual 3:1 mixers. The mixer is "split" when a patchcord is inserted into the OUT 2 jack.

The MOTM-830 is unique in the modular world: it is optimized for both audio signal quality and DC stability. Other mixers are generic, TL072-type mixers which are OK for audio but suffer from input offset voltage drift over temperature. The MOTM-830 uses special circuitry to provide superior audio specs (less than 0.005% THD, greater than 90dB SNR) while having superior DC specs (less than 1uV/C drift). Other features include:

• Shielded cables on ALL signals
• DC Bias generator: module can act as DC source!
• Mixer #1 (IN1 - 3) uses linear pots, while Mixer #2 (IN4 - 6) uses audio taper pots
• All pots are sealed, conductive plastic for long life and low noise

Easy to build, the MOTM-830 is a valuable addition to your MOTM system.